home *** CD-ROM | disk | FTP | other *** search
/ Tech Arsenal 1 / Tech Arsenal (Arsenal Computer).ISO / tek-20 / kencon.zip / KENCON.DOC < prev    next >
Text File  |  1990-08-14  |  4KB  |  82 lines

  1. KENCON-1.EXE     COM1 version 1.1b compiled basic
  2. KENCON-2.EXE    COM2 version 1.1b compiled basic
  3. KENCON.EXE      COM1-COM4 version 1.1c rewritten in Microsoft C
  4. KENCON.doc    this file
  5.  
  6. No hardware modification is required to use KENCON-1 or KENCON-2 but to use
  7. KENCON.EXE you must jumper RS232 pins 20 & 6. This can be done either
  8. inside the IF232-c or within the cable connectors. KENCON will NOT work
  9. without this simple modification.
  10.  
  11. KENCON-x.EXE is a stand alone compiled basic program designed to control
  12. the KENWOOD 440s from the keyboard of an IBM-PC computer through
  13. serial ports COM1 or COM2. It is designed to run from a single command
  14. line or through the menus provided in the program itself. 
  15.  
  16. KENCON.EXE was written in C because it seems to cause less disturbance
  17. with other COM ports when run. Since one program will drive com ports
  18. 1 through 4 an additional command is requested to identify which port
  19. is connected to the radio. It is not recursive like the Basic version 
  20. but that will be fixed in a later release.
  21.  
  22. By entering all KENCON-x commands from the command line the program can be 
  23. used with the new "!" DOS shell command in CPBBS software. 
  24.  
  25. EXAMPLE of a typical command used in the FWD.MB file:
  26.  
  27. !b0023            <DOS shell command for port B of the CPBBS
  28. KENCON-2 26 5        <KENCON-2.EXE command string (COM2:)
  29. *** EOF            <END of dos shell
  30. GB0023F KB3MY        <Beginning of next forward list
  31. KB3MY
  32. *** EOF
  33.  
  34. In the above example the "KENCON-2" runs the KENCON-2.EXE program then
  35. picks option "26" (SELECT MEMORY CHANNEL) and finally "5" which
  36. selects channel 5. This same kind of command sequence could be used
  37. in the autoexec file to initialize the radio on startup. By entering
  38. the frequency as a negative number (-14111.510) the program will
  39. send the TUNE ANTENNA command following the frequency change. In
  40. addition I have added a separate TUNE ANTENNA function as option 36.
  41.  
  42. For the KENCON version the above command line would be as follows:
  43.  
  44. KENCON 2 26 5
  45.  
  46.  
  47. As you will see there is room for 9 additional functions in the menu
  48. so if anyone has a wish list just let me know. I will not be adding
  49. any functions that read information FROM the radio so don't ask for
  50. them.
  51.  
  52. KENCON.EXE was written in C because it seems to cause less disturbance
  53. with other COM ports when run. One program will also work with com ports
  54. 1 through 4. It is not recursive like the Basic version but that will
  55. be fixed in a later release.
  56.  
  57. These programs were written to allow a handicapped ham control his
  58. radio from the keyboard of his PC. 
  59.  
  60. If any of you have any comments or suggested additions to the program
  61. please let me know.
  62.  
  63. COMMENT:
  64.     One of the considerations for purchasing the 440 was its ability
  65. to be controlled from the keyboard. Since it has a built in auto tuner,
  66. I and many others assumed we could activate the tuner form the computer,
  67. NOT TRUE for the 440. It seems to me that the ability to change frequencies
  68. with the tuner is nearly useless. I have contacted Kenwood and they indicated
  69. that I was the first to complain. If they were to receive "enough" complaints
  70. they would consider a modification to offer tuning from the keyboard. In
  71. my particular case I use the 440 on our Navy MARS packet net. This requires
  72. several off the wall frequencies and tuning is a must on several of them.
  73. For a handicapped operator this capability might mean the difference between
  74. total enjoyment of the ham experience vs. added frustration. If you agree
  75. that auto tuning is a much needed 440 capability, please call or write Kenwood
  76. in California and ask them to design a modifications for us. Thanks!
  77.  
  78. de KB3MY, CIS 72605,1465 Buster Light
  79. 15331 Valencia Street, Sliver Spring, Maryland 20905
  80.  
  81. via packet: KB3MY @ KB3MY
  82.